Kirkaldy Testing Museum

Sunday, February 17, 2019

I recently got to spend a cold but sunny Sunday on a little jaunt that absolutely perfectly occupied the sweet spot in the Venn diagram of “Quirky London Sites” and “Things that interest Pam” and “Things that are bloggable” - a visit to the Kirkaldy Testing Museum.

IMG_3130
Hidden in plain site on Southwark Street, just a block from the Tate Modern.

David Kirkaldy was a Scottish-born engineer who pioneered the science and practice of methodical materials testing by establishing the first ever independent testing works to determine the strength of the new materials available to Victorian engineers - mostly cast and wrought iron. This was incredibly important because iron as a construction material is part of what fuelled the Industrial Revolution (along with mechanisation, steam power, and a ready supply shoeless orphans to dart around in all the shiny new mangling devices.)

IMG_3183
The pediment above the former main entrance to the testing works.

Kirkaldy’s testing works opened in 1866 in a location close to the current site in Southwark. The engineer then later designed his giant hydraulic “Universal Testing Machine" for evaluating different materials in tension or compression, had it built in Leeds, and installed it in a new purpose-built building where it’s still located today. (Mercifully, it’s very much built into the Grade 2 listed property so it would have been difficult to remove anyway. Plus it’s more than 47 feet long, so it’s not like a vandal could have just slipped it into his pocket.) The testing works opened on January 1, 1874 and ran for close to a hundred years, headed by two more generations of Kirkaldy engineers, David’s son and grandson. And along with routine testing of the countless links and bars and columns and beams that built the modern world, Kirkaldy conducted forensic testing on failed structural elements, such as those from the infamous Tay Bridge Disaster. He also continued developing new machines and techniques for analysing materials, and the works received test specimens from around the world.

Luckily, after the works closed the site was recognised by members of the Greater London Industrial Archeological Society, who helped get it listed for preservation. (And can I just say that discovering the existence of the Greater London Industrial Archeological Society was one of the best things about my day? How can they have escaped my detection for so long?) Thanks in part to their intervention, Kirkaldy's works have been a museum since 1983, and it's now open to the public on the first Sunday of every month, staffed with volunteers (much like the poor Kew Museum of Water and Steam which Astute Go Stay Work Play Live Readers will doubtless remember). A visit costs a mere £5 and for that you get a guided tour of the museum’s collection of vintage testing machines and - more excitingly - a live demonstration of some of them.

My guide was a small boiler-suited and bespectacled man who first showed us an introductory video in the basement of the building, and then a few of the smaller machines they keep.

IMG_3133
Like these pendulum impact testing machines, which, as any fool can see, are scientifically designed devices for whacking things in a very precise manner and measuring how much energy they absorb when they break.

They also have an impressive collection of small moulds for making concrete test pieces, which are shaped like dog bones and used for testing the tensile strength of concrete by pulling the dogbones apart. They’re shaped like dogbones so that the machine has something to grab and so that the bit you grab is larger that the bit you’re testing, so you can be reasonably confident that the test pice will break in the right place and the results will be properly consistent.

IMG_3143
This machine slowly adds lead shot to one side of a set of balances, while the other side pulls on the dogbone. When the sample piece breaks, the flow of shot is cut off and then weighed to determine the breaking point of the concrete.

IMG_3141
They also make plain cubes for testing concrete's resistance to compression. Of course concrete is massively stronger in compression than in tension, which is why steel reinforcing is added to most modern concrete structures to increase their tensile strength.

Along with the surprising discovery of the Greater London Industrial Archeological Society, I learned another amazing thing at the Kirkaldy Testing Museum. As recently as 1977, an organisation called the London Hydraulic Power Company supplied high pressure water for hydraulic powered devices to businesses all over London, on both sides of the Thames, through a network of more than 150 miles of cast iron and steel pipes. Before it was established in the late 19th century, companies that wanted to power machinery hydraulically had to run and maintain their own boilers, often also needing to employ large accumulator towers for storing the energy they produced. With the establishment of the London Hydraulic Power Company, pipes ranging in diameter from 2” to 10” eventually stretched from Kensington to the Docklands, powering cranes, lifts, presses and other machinery of all kinds including, of course, Kirkaldy's large testing machine. At Kirkaldy’s they also employed a hydraulic intensifier to take the operating pressure up to an impressive 4,500 PSI.
"Hydraulic power raised the curtain at the Royal Opera House, rotated the turntable at the Coliseum, raised lifts at the Bank of England (and thousands of other offices and flats) and opened dock gates on the Thames. In its heyday the company's hundreds of workers pushed out up to 30 million gallons a week at 850 pounds per square inch from its six pumping stations.” From Subterranea Britannica
Once electric motors became established as a means of powering machinery, the need for the system waned and it was eventually closed down completely in 1977. However, a clever group acquired the assets of the company in 1981, recognising the value of the vast system of pipes. Those same conduits are now used to run fibre-optic cables through the heart of London. And I just think that whole thing is fucking fantastic.

IMG_3139
A map of the LHPC network unceremoniously displayed in the basement of Kirkaldy’s

After viewing the impact tester, and the dogbone puller and a few other things like a 40’ long chain testing machine, we got to move upstairs and actually use one of the smaller devices to pull apart a piece of the devilish reinforced plastic strapping that gets wrapped around heavy pallets or packages and secured with those funny metal clips.

The tension mounts. Literally.

Of course the main reason to visit Kirkaldy’s Testing Museum is to see the big machine in action, which you can do if you stick around until 2pm on an open Sunday. (Or, happily, if you take in the other displays and then decamp to a nearby coffeeshop for a caffeine hit and a nice pain au chocolate and then return at 2pm.) I stationed myself with a good view of the area and watched while the grey-haired volunteers prepared the machine to rip apart a rusty steel bar cut out of an old street grate reclaimed from outside the building.

IMG_3187
There was even one woman on the crew, which is very unusual in my experience. Here she is setting the moving end of the machine to the right position to accept the steel bar.

The hydraulics in the machine only work in one direction, meaning that the hydraulic ram has to be returned to its starting position by heavy counterweight in the basement. Switching the machine from pulling mode (tension) to crushing mode (compression) is quite labour intensive, so we only saw pulling mode. Also crushing mode tends to produce flying debris that is not conducive to public participation.

Once the carriage was in position another volunteer climbed into the machine to set the tiny steel bar into place. As I mentioned before, test pieces are normally shaped to give something for the clamps to grab, but in this case the bar was simply wedged with a series of tapered steel pieces banged in with a large sledgehammer. Nearby displayed showed lots of different wedges used for this purpose.

At the other end of the machine there's a large horizontal arm connected to the measuring part of the device, which consists of a balance arm and a series of counterweights. As the cylinder moves, the arm swings and transmits movement to the balance. The machine operator then slowly winds a gear that moves a counterbalancing weight to keep the big balance arm level, which simultaneously moves a pointer along a marked scale showing the pressure the machine is exerting. Once the sample breaks, the indicated measure can be noted. Or, if the sample is being proof tested, the pressure in the machine can be increased to that proof load to test that the material is adequate. Two out of every fifty of the giant links that make up the suspension chains in the Hammersmith Bridge were tested this way by that very machine.

IMG_3192
Here’s the day’s operator gesticulating near the controls for the balance arm.

Our little test piece was about half an inch thick and two inches wide. And though it was impossible to perceive the movement of the cylinder as the test proceeded, there came a point when little flakes of old paint and rust began to fall off the test piece onto a sheet of clean white paper underneath. The volunteer running test then said, “We’re inconveniencing the material” which I thought was a masterfully understated way of putting it, considering that a machine capable of exerting loads up to one million pounds of pressure was, at that moment, attempting to rip apart the chemical bonds inside that poor little piece of metal.

IMG_3197
Eventually the piece broke, after yielding about two inches. Disappointingly the break occurred inside the clamping jaws, so there was no big aha! moment. They did, however, manage to get the pieces out of the clamps, and passed them around.

It’s also possible to tour a part of the testing works office, which was quite lovely. There was a large glass fronted wooden bookcase absolutely filled with proper engineering books with titles like The Mechanical Testing of Metals and Alloys, Hydraulic Power Engineering, History of Strengths of Materials, and that classic page-turner, Theory of Elastic Stability. There were also framed copies of Kipling’s Hymn of Breaking Strain and a large framed copy of David Kirkaldy's obituary, published in The Engineer on February 5, 1867.

IMG_3170
This is just the first paragraph, but it's appropriately laudatory.

It’s really not over-egging things, this obituary. David Kirkaldy made a remarkable and unique contribution to the modern built environment. He was methodical, meticulous and, above all, scrupulously honest. To run a completely independent and unbiased testing works, free from outside influence, was absolutely vital to the safe development of all kinds of structures, which of course qualifies him for the Go Stay Work Play Live Hall of Heroes, where he takes up a position alongside Isambard Kingdom Brunel, Joseph BazagettteHarry Beck, Captain Picard, and whatever genius it was who invented sticky toffee pudding.

Meringue, humidity, and chocolate ganache

Sunday, February 3, 2019

Yes, it’s been a while. I’m very aware that the last time I blogged was two months and three countries ago. Sorry, but sometimes life just gets in the way even when I’m not elbow-deep in a work project in a far-off land. And sometimes I just need a while to get back into the swing of things. (Also, I've been blogging for more than decade now, so cut me some slack, eh?) Having been away from London for 39 of the 52 weeks in 2018, I’ve mostly just been enjoying being back and puttering on the boat. I’m also getting a new show started. Oh, and I celebrated a pretty big birthday, which I did in fine fashion with a visit from my best friend Karen.

After the resounding success of our Prague trip, Karen and I decided to have another vacation-within-a-vacation, this time by catching the Eurostar to Paris for a long weekend. We managed to fill our time there very usefully, mostly with equal portions of walking and cheese, reasoning that if you’re racking up 14km per day on your feet then by God there had better be cheese at the beginning, middle and end.

IMG_2919
Karen and the Cheese Plate to Rule Them All. (Clarifying note: This cheese was not all just for us. The giant platter was simply moved from table to table in the restaurant as each set of diners reached the appropriate point in the meal. The procedure was to slice off pieces of whatever cheeses looked enticing (ie: all, especially the one covered in raisins and the super stinky runny one), and then the waiter would take the whole platter to the next people. Such a good system.)

In between cheese plates we fit in a few galleries, some casual sightseeing, a bit of shopping and some long distance viewing of inchoate gilets jaune protests, complete with armoured cars and mounted police. One highlight was a long stroll through the Bastille Market on Sunday morning, which was very conveniently located near our AirBnB, and where we bought the ingredients for an amazing lunch. Also where it’s possible we may have got hot sauerkraut and sausages as a snack to fortify ourselves so we could power through the cheese, charcuterie and token vegetable purchases to come.

IMG_5907
Waiting for the sausages

But one of our main activities in Paris was a class in baking macarons. (Another from the increasingly varied list AirBnb experiences, similar to the one Karen and I did in Prague.) For those who have not had the pleasure of encountering a French macaron, I pity you. They’re a lovely sweet treat made up of two meringue biscuits that sandwich ganache or jam or buttercream icing. The meringue shell manages to be both ethereally light in the crust and satisfyingly chewy on the base, and they’re usually made in a rainbow of bright colours matching the flavour, most of which is in the filling, though sometimes the meringue also has a subtle flavour. Popular offerings are vanilla, chocolate, fruit, pistachio and coffee, with more outrĂ© forays into matcha, rose, liquorice and even sea buckthorn. (Mon Dieu!)

P1080642
In a first for this blog series, we’re repeating a photo! This is an encore presentation from back in 2011. Good grief, I’ve been blogging for a loooong time...

Our lesson started a bit too early in the morning for people who were on vacation, but we mitigated the earliness of the hour with a pitstop at the local bakery (Bien sur!) while en route to the apartment near Bastille where the class took place. There we met our host Nomar, who turned out to be from Venezuela, which seemed a bit odd considering we were in Paris to learn about one of the most iconic French delicacies. Then again, she was clearly the most experienced macaron-maker in the room, so we followed the instructions, even when they raised a few eyebrows, as we shall see.

IMG_2922
The set-up, ready to go.

Nomar and her partners run a few different classes, including ones for crepes, chouquettes - another classic French treat that’s basically small balls of choux pastry covered in chunky sugar - and even one on traditional Venezuelan arepas. But our plan was to make classic chocolate macaron filled with ganache, so the first task was the ganache. I’ve seen this done countless times on The Great British Bake Off - enough to know that it looks simple, but also enough to know that anything to do with chocolate can be fiendishly fickle. There are traditionally just two ingredients that make up ganache: good quality chocolate added to hot cream, though it’s sometimes made even more shiny and gorgeous by adding butter (because: France!). However, Nomar’s method was a bit different - starting by melting the chocolate alone on double boiler on a very very very low heat (judging by the time it took I think it was only slightly above body temperature). Once the chocolate was finally ready, she incorporated the cream with a technique that involved pressing the back of a rubber scraper/spatula (let’s not get into that, ok?) into the mix and sort of mushing it together, as opposed to simply stirring. I’m sure she had her reasons, but it did seem odd. And it did actually result in the ganache splitting. (For the uninitiated splitting or breaking is what happens when the oils in the chocolate separate out leaving the ganache uneven, gritty and unusable.)

Nomar was ready to start a fresh batch of ganache, because only once in her experience had a course participant managed to bring split ganache back from the dead. However, your humble blogger was undaunted. So while Nomar measured out the chocolate again and cranked the stove back up to 98.6 degrees, I had a go at the split ganache by simply whisking the hell out of it for a few minutes. This was completely successful, so that new qualification is now going straight into my online dating profile: Meet Pam - inconsistent blogger, International Woman and Mystery, and Ganache Whisperer.

Next stop: meringue (also notoriously skittish). There are two meringue options available for the macaron chef - French and Italian. Obviously any Astute Go Stay Work Play Live Reader knows the difference, but humour me while I pad things out with a quick explanation. French meringue is made by whipping egg whites to a stiff peak and then carefully adding sugar. The beaten eggs therefore remain uncooked until the meringue is baked. French meringue is apparently a bit airier but more fragile than its cousin, Italian meringue, wherein the eggs are whipped first and then the sugar is added as molten syrup, thus cooking the meringue as it forms. Italian meringue is supposedly a bit tougher, and it doesn’t require additional cooking before it’s safe to eat. (There’s also Swiss version where the sugar and eggs are heated together and then beaten. It’s all explained here.) Nomar chose Italian meringue, which involved making the sugar syrup on the stove while the Ganache Whisperer tried her hand at beating egg whites. Sadly, the results were less than spectacular.

IMG_2926
Two attempts at Italian meringue, both failures.

Popular myth is that it’s tricky to make meringue on a rainy day, so perhaps we can put that down as the reason why two different bids with a hand mixer resulted in bowls of white gloop instead of perky meringue.

IMG_2930
It wasn’t until Nomar broke out the big KitchenAid mixer that we managed to tame the meringue and add a flash of bright pink to highlight our eventual success.

Next we combined the meringue with a mix of ground almond and sugar into the final batter for the meringue shells (that’s all that’s in macaron shells - ground almond, egg, meringue and colouring). Again, there was an odd pressing/mixing technique that looked well-designed for knocking air out of meringue, which didn’t really seem like the point. Nonetheless, we ended up with something that went into a piping bag and then onto a specially marked silicone baking sheet.

IMG_5815
Action shot!

The tray of shells went into the oven for what turned out to be an unexpectedly long time, and I ended up having to rescue the ganache again, since it stiffened up considerably while we faffed with the meringue.

IMG_5839
The Ganache Whisperer, Part Two

Luckily, while we waited for the shells to come out of the oven and cool a bit, there were a few distractions.

IMG_5813
Like this.

IMG_5831
And this!

Eventually, everything was ready for final assembly and managed to put together a plate of quite decent looking chocolate macarons. To be completely honest, the flavour and texture were not up to the standards of Ladurée, but for a first attempt on a rainy day I thought they were not bad.

IMG_2948
Yes, there are a few wonky ones. But they all tasted the same with pink champagne.

We each left with a small package of our own macarons. And we left with directions on how to get to the specialist baking shop where they sold little jars of the powdered colour used to tint the meringue shells, which Karen bought in six shades and schlepped back to Canada. She’s also got one of the specially marked silicone baking mats on order, and claims she’s got all the other ingredients too, so no more excuses!

IMG_2950
The successful patisseurs. Next stop: Lunch!

So that was the macaron lesson. It was a fun way to spend the morning. And though we had some issues, we certainly left with a lot more practical knowledge about the intricacies of the process than we had when we went in. I’m expecting insta-worthy photos of homemade macarons (in at least six colours) from Karen any minute now. I, meanwhile, will be squandering my ganache talents and concentrating on fixing the latest leak in the boat engine cooling system and getting ready to take the Lucky Nickel out of the marina and back onto the towpath en route to some much more extensive mechanical work that involves actually taking the boat out of the water.

What could possibly go wrong?